Difference between revisions of "Repairing a cracked, damaged or worn wheel"

From Motorboards
Jump to: navigation, search
Line 3: Line 3:
 
==Light wear and cracks==
 
==Light wear and cracks==
  
A quick fix might be to spray paint a worn wheel with a polyurethane coating. I have no idea if this would work:
+
A quick fix might be to spray paint a worn wheel with a polyurethane coating. I have no idea if this would work: http://www.utilitysafeguard.com/K07120-Clear-Polyurethane-Coatings-Matte
http://www.utilitysafeguard.com/K07120-Clear-Polyurethane-Coatings-Matte
 
  
 
I could be wrong, but paint is general 0.1 to 0.2 mm thick. This would require many coats to achieve 1mm.
 
I could be wrong, but paint is general 0.1 to 0.2 mm thick. This would require many coats to achieve 1mm.
  
 
[[image:media.nl.jpg|thumb|right|K07120 Clear Polyurethane]]
 
[[image:media.nl.jpg|thumb|right|K07120 Clear Polyurethane]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 
==Heavy wear and notches==
 
==Heavy wear and notches==
  
 +
[[image:m1_sealant.jpg|thumb|right|M1 sealant]]
 
It is possile to use M-1 sealant from bestmaterials.com to fill gaps, cracks, and flat spots.
 
It is possile to use M-1 sealant from bestmaterials.com to fill gaps, cracks, and flat spots.
  
[[image:m1_sealant.jpg|thumb|right|M1 sealant]]
+
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
  
 
==Retreads==
 
==Retreads==
 +
 +
[[image:0261_2.JPG|thumb|right|Polyurethan sheet]]
  
 
It appears to be possible to purchase a [http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370144489952&ssPageName=ADME:X:RTQ:US:1123 .145" X 12" X 12" URETHANE/POLYURETHANE SHEET 75D] and cutting it into a disk, approximate 4.5" in diameter and 1/2" wide to match the sidewalls of the tire. Then polish down the wheel the the appropriate width and glue on the disk. It would not be necessary to bend the polyurethane sheet because the sidewalls are flat.
 
It appears to be possible to purchase a [http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370144489952&ssPageName=ADME:X:RTQ:US:1123 .145" X 12" X 12" URETHANE/POLYURETHANE SHEET 75D] and cutting it into a disk, approximate 4.5" in diameter and 1/2" wide to match the sidewalls of the tire. Then polish down the wheel the the appropriate width and glue on the disk. It would not be necessary to bend the polyurethane sheet because the sidewalls are flat.
Line 22: Line 46:
 
Poly Tech Innovations sells an adhesive for bonding the two urethane together, 1/2 pint kit is 20.95.
 
Poly Tech Innovations sells an adhesive for bonding the two urethane together, 1/2 pint kit is 20.95.
  
[[image:0261_2.JPG|thumb|right|Polyurethan sheet]] Paul Oliver<br>
+
Paul Oliver<br>
 
Poly Tech Innovations<br>
 
Poly Tech Innovations<br>
 
35283 340th Street<br>
 
35283 340th Street<br>
Line 29: Line 53:
  
 
==Replacement==
 
==Replacement==
 +
[[image:4HL94.JPG|right|thumb|12mm polyurethane tubing]]<p>
 +
 +
[[image:273-WEZ-0620-MOPP.jpg|right|thumb|Wheel replacement]]
 
As of January 2009, community members have been unsuccessful at ordering replacement wheels from Roth or its dealers.
 
As of January 2009, community members have been unsuccessful at ordering replacement wheels from Roth or its dealers.
  
Line 37: Line 64:
  
 
It is too narrow by about 5mm, but potentially this can be made up by placing polyurethane tubing over the motor drive shaft cone.
 
It is too narrow by about 5mm, but potentially this can be made up by placing polyurethane tubing over the motor drive shaft cone.
 
[[image:4HL94.JPG|right|thumb|12mm polyurethane tubing]]<p>
 
 
[[image:273-WEZ-0620-MOPP.jpg|right|thumb|Wheel replacement]]
 

Revision as of 13:19, 11 February 2009

The wheels wear out and are no longer usable after 1-2mm are worn off the sides.

Light wear and cracks

A quick fix might be to spray paint a worn wheel with a polyurethane coating. I have no idea if this would work: http://www.utilitysafeguard.com/K07120-Clear-Polyurethane-Coatings-Matte

I could be wrong, but paint is general 0.1 to 0.2 mm thick. This would require many coats to achieve 1mm.

K07120 Clear Polyurethane








Heavy wear and notches

M1 sealant

It is possile to use M-1 sealant from bestmaterials.com to fill gaps, cracks, and flat spots.






Retreads

Polyurethan sheet

It appears to be possible to purchase a .145" X 12" X 12" URETHANE/POLYURETHANE SHEET 75D and cutting it into a disk, approximate 4.5" in diameter and 1/2" wide to match the sidewalls of the tire. Then polish down the wheel the the appropriate width and glue on the disk. It would not be necessary to bend the polyurethane sheet because the sidewalls are flat.

Poly Tech Innovations sells an adhesive for bonding the two urethane together, 1/2 pint kit is 20.95.

Paul Oliver
Poly Tech Innovations
35283 340th Street
Lake City, MN 55041
poliver@polytechinnovations.com

Replacement

12mm polyurethane tubing

Wheel replacement

As of January 2009, community members have been unsuccessful at ordering replacement wheels from Roth or its dealers.

The closest match to the required measurements that I have found is the WEZ-0515-MOPP by Ez Roll Caster].

5" x 1 1/2" x hub 1 5/8" x bore 1 3/16" or in metric terms 125mm x 38.1mm x hub 41mm x bore 30mm

It is too narrow by about 5mm, but potentially this can be made up by placing polyurethane tubing over the motor drive shaft cone.