Front Suspension information

From Motorboards
Revision as of 12:46, 11 February 2009 by WikiSysop (talk | contribs)

Jump to: navigation, search

Take care if adjusting the front wheel splash guard. The splash guard bolts are glued on. If you try and remove them to adjust the splash guard the bolts may snap.

The Roth website says:

This is the Front Spring Suspension for the 2000X Motorboard. It includes the suspension piece and the plastic fender. No Wheel or screws are included.
IMPORTANT! You must use some kind of liquid thread lock (not included) on the threads of the screws when attaching this piece, or it will vibrate lose when riding and result in a dangerous situation.
Note for 1500X owners: This piece was designed to fit on the 2000X model Motorboard. We cannot guarentee that it will fit perfectly on a 1500X model Motorboard. We have tested the fit on many 1500Xs, and the majority have fit just fine, but you may need a rubber hammer or at worst a dremel tool to get a perfect fit.